Our high tunnels for mushrooms are created based on several successful projects and optimized for the cultivation of oyster mushrooms with a maximum load of 23 tons of compost.

1. Grow room

Dimensions: Width: 8m; Length: 30m; Area: 240sqm; Ridge height: 3.30m; Gutter height: 2.35m.

Structure: E260 type galvanized steel, with a 60mm diameter pillars and arches. The arches and pillars are latticed and are placed every 1,5m.

Roof and sides coverage and thermal insulation: white/green 250 microns three-layered 250 microns film on the exterior, 20cm glass wool layer between the films, transparent 200 microns film on the interior.

Gable coverage and thermal insulation: 80mm sandwich panels. The corners are secured using aluminum corner guards.

Access areas: 3 access doors (0,9mx2,0m) insulated with polyurethane panels. The doors are positioned longitudinal.

2. Technical space – used to safekeep the electric and electronic equipment or as a storage space for the picked mushrooms.

Dimensions: Width: 8m; Length: 3m; Area: 24sqm; Ridge height: 3.30m; Gutter height: 2.35m.

The structure and the roof, sides and gable coverage and thermal insulation are identical to those of the grow room.

3. Shelves for mushroom cultivation

• • Metal shelves with galvanized steel frame E260 Sendzimir;
  • Legs and cross elements (40x40mm); CORs – 5 lines/level;
  • Dimensions: Side shelf L * w * h = 28.5x0.9x1.8m, 2 shelves - 2 pieces of 51.3sqm each; Central shelf L * w * h = 28.5x0.9x2.4m, 3 shelves - 2 pieces of 76.95sqm each;
  • Longitudinal shelf placement, shelf-shelf and shelf-wall distance: 88 cm.

4. Auxiliary systems, installations, and equipment

A. Technological climate control equipment

• • LINE.P programmable control panel (designed for the command and control of the parameters in the mushroom cultivation chamber, by programming the parameters on the technological phases of cultivation
  • CO2.LIN single CO2 sensor (designed for the measurement and determination of the CO2 concentration)
  • UTA.P20 air treatment unit (it is a complex unit, sized for air treatment in the grow area)
  • MAD.P20 air intake/distribution technological module (it is a prefabricated modular equipment that ensures the intake of air from outside, recirculates the air from the cultivation chamber and distributes the mixed air into the cultivation chamber)
  • GE.2 exhaust group
  • PEV.20 evaporation filter panel
  • GRPE.1 water cooling unit evaporation filter

B. Auxiliary equipment and technological installations

• • Chiller 28 Kw (designed to obtain cold water at a temperature of 6ºC/12ºC, round-trip, necessary in adjusting the technological parameters)
  • Thermal installation - technological cooling (includes the round-trip technological cold water circuit, from the chiller to the air treatment unit)
  • 18 Kw thermal heater (designed to obtain technological hot water 60ºC/85 ºC for a cultivation chamber)
  • Thermal installation - technological heating (includes the round-trip technological hot water circuit)
  • Power unit (all electrical installations made from the general switchboard in the built perimeter)
  • Electrical unit for interior lighting (all electrical installations made in the culture chamber)

C. Technological assembly of equipment (A+B)

The price does not include the following:

Important! The price includes the assembly and commissioning for technological equipment and the climate system only, provided a prior appointment and payment of transportation costs for the team, plus accommodation and meals for 4 people for up to 6 days.

An advance of 60% is required when placing an order.